掠飞末敏弹耦合运动动导数计算

以新型掠飞末敏弹为研究对象,提出了基于欧拉转动定理和滑移网格技术的复杂角运动模拟方法,利用著名的罗德里格斯转换矩阵插值求得弹箭在每个时间步的角速度修正值,并指定给球形滑移网格区。通过对非定常气动参数进行求解辨识,分析了不同马赫数下掠飞末敏弹滚转运动对其俯仰组合动导数和升力系数动导数的影响规律。结果表明:所提角运动模拟方法可有效消除姿态角计算的累积误差,实现对弹箭任意给定角运动的准确模拟;弹箭滚转运动对俯仰组合导数和升力系数动导数的辨识结果均存在显著影响,在进行弹箭动导数计算和稳定性分析时需充分考虑俯仰耦合效应的影响。     

满足大动压模拟要求的试验弹道优化设计

为了解决弹道导弹在高海拔发射场进行飞行试验时的大动压检验问题,提出一种模拟大动压条件的试验弹道设计方法。针对发射场的实际特点,建立残骸再入的动力学模型与落区边界模型;将大动压模拟条件转化为过程约束,提出一种主动段联合优化策略。基于自适应模拟退火算法,分别设计了三组满足不同大动压模拟条件和各项约束的试验弹道,并给出了对应的落区调整方案,验证了该方法的可行性。设计结果表明,最大动压主要出现在一级,一级最大负攻角增加,则最大动压也明显提高;同时调整发射方位角和二、三级程序角可以保证试验弹道满足弹头落点约束条件。     

改进的Euler方法应用于非线性方程求根

本文通过引入动力系统，将改进的Euler方法应用于非线性方程求根问题，给出非线性方程求根的预估-再校正迭代格式，证明了该格式至少二阶收敛并可以调节参数达到超收敛。最后给出数值实验，数值结果验证了算法的有效性。     

Warranty claims modeling

A company wishes to estimate or predict its financial exposure in a reporting period of length T (typically one quarter) because of warranty claims. We propose a fairly general random measure model which allows computation of the Laplace transform of the total claim made against the company in the reporting interval due to warranty claims. When specialized to a Poisson process of both sales and warranty claims, statistical estimation of relevant quantities is possible. The methodology is illustrated by analyzing automobile sales and warranty claims data from a large car manufacturer for a single car model and model year. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

考虑扩散效应圆形隧洞热弹性耦合动力响应研究

利用S-H热弹性扩散的基本理论,研究了无限弹性介质中圆形隧洞表面受随时间变化的热冲击的动力响应问题.采用直接求解方法以避免势函数的引入,利用Laplace变换技术,求解热、力、化学耦合控制方程,获得了弹性介质中温度梯度、位移、应力和化学势的积分形式解.最后,利用Laplace逆变换得到数值结果,分析了热、力、化学耦合条件下弹性介质中温度梯度、应力、位移和化学势响应的分布规律.     

Application of Markov renewal theory and semi-Markov decision processes in maintenance modeling and optimization of multi-unit systems

In this paper, a condition-based maintenance model for a multi-unit production system is proposed and analyzed using Markov renewal theory. The units of the system are subject to gradual deterioration, and the gradual deterioration process of each unit is described by a three-state continuous time homogeneous Markov chain with two working states and a failure state. The production rate of the system is influenced by the deterioration process and the demand is constant. The states of the units are observable through regular inspections and the decision to perform maintenance depends on the number of units in each state. The objective is to obtain the steady-state characteristics and the formula for the long-run average cost for the controlled system. The optimal policy is obtained using a dynamic programming algorithm. The result is validated using a semi-Markov decision process formulation and the policy iteration algorithm. Moreover, an analytical expression is obtained for the calculation of the mean time to initiate maintenance using the first passage time theory.     

基于ADAMS和Matlab的大口径舰炮发射系统动力学仿真

利用ADAMS和Matlab/Simulink两大软件的信息交互功能,将ADAMS中的全炮动力学仿真模型生成ADAMS_SUB模块,并将其嵌入联合后坐系统仿真模型中;通过ADAMS和 Matlab/Simulink同步运行对全炮进行发射动力学联合仿真,模拟大口径舰炮发射的全过程,分析全炮的动态响应.对全炮发射动力学联合仿真结果进行后处理分析,观察炮口扰动曲线,进行稳定性分析和炮口扰动分析.根据分析结果,对所建模型及仿真模块进行评价,结果表明,仿真结果与靶场试验数据基本吻合,为物理样机的研制提供了重要的理论参考依据.     

空中机动目标刚体运动建模方法

传统目标跟踪和识别算法通常建立在目标质点运动模型的基础上,其实现过程相对简单,但也存在精度不高的缺点.随着现代雷达、目标跟踪/识别技术的发展,以及各种高精度目标测量传感器的运用,建立更精确的刚体运动模型已成为一种必然需要.概述了国内外在空中机动目标刚体运动建模这一领域的研究现状,并详细介绍了当前常用的几种空中机动目标刚体运动建模方法,最后,根据分析总结了当前这些建模方法存在的缺陷,并指出了其可能的研究方向.     

Dynamic inventory management with cash flow constraints

In this article, we consider a classic dynamic inventory control problem of a self‐financing retailer who periodically replenishes its stock from a supplier and sells it to the market. The replenishment decisions of the retailer are constrained by cash flow, which is updated periodically following purchasing and sales in each period. Excess demand in each period is lost when insufficient inventory is in stock. The retailer's objective is to maximize its expected terminal wealth at the end of the planning horizon. We characterize the optimal inventory control policy and present a simple algorithm for computing the optimal policies for each period. Conditions are identified under which the optimal control policies are identical across periods. We also present comparative statics results on the optimal control policy. © 2008 Wiley Periodicals, Inc. Naval Research Logistics 2008